 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FSB560/FSB560A July 1998 FSB560 / FSB560A C E B SuperSOT -3 (SOT-23) TM NPN Low Saturation Transistor These devices are designed with high current gain and low saturation voltage with collector currents up to 2A continuous. Absolute Maximum Ratings* Symbol VCEO VCBO VEBO IC TJ, Tstg Parameter Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Collector Current - Continuous TA = 25C unless otherwise noted FSB560/FSB560A 60 80 5 2 -55 to +150 Units V V V A C Operating and Storage Junction Temperature Range *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Thermal Characteristics Symbol TA = 25C unless otherwise noted Max Characteristic FSB560/FSB560A PD RJA Total Device Dissipation Thermal Resistance, Junction to Ambient 500 250 mW C/W Units (c) 1998 Fairchild Semiconductor Corporation FSB560.lwpPrNA 7/1098 RevB FSB560/FSB560A NPN Low Saturation Transistor (continued) Electrical Characteristics Symbol Parameter TA = 25C unless otherwise noted Test Conditions Min Max Units OFF CHARACTERISTICS BVCEO BVCBO BVEBO ICBO Collector-Emitter Breakdown Voltage Collector-Base Breakdown Voltage Emitter-Base Breakdown Voltage Collector Cutoff Current IC = 10 mA IC = 100 A IE = 100 A VCB = 30 V VCB = 30 V, TA=100C IEBO Emitter Cutoff Current VEB = 4V 60 80 5 100 10 100 V V V nA uA nA ON CHARACTERISTICS* hFE DC Current Gain IC = 100 mA, VCE = 2 V IC=500mA, VCE =2V FSB560 FSB560A IC = 1 A, VCE = 2 V IC = 2 A, VCE = 2 V VCE(sat) Collector-Emitter Saturation Voltage IC = 1 A, IB = 100 mA IC = 2 A, IB=200 mA FSB560 FSB560A VBE(sat) VBE(on) Base-Emitter Saturation Voltage Base-Emitter On Voltage IC = 1 A, IB = 100 mA IC = 1 A, VCE = 2 V 70 100 250 80 40 300 350 300 1.25 1 V V mV 300 550 - SMALL SIGNAL CHARACTERISTICS Cobo fT Output Capacitance Transition Frequency VCB = 10 V, IE = 0, f = 1MHz IC = 100 mA,VCE = 5 V, f=100MHz 75 30 pF - *Pulse Test: Pulse Width 300 s, Duty Cycle 2.0% (c) 1998 Fairchild Semiconductor Corporation FSB560.lwpPrNA 7/1098 RevB Typical Characteristics VBESAT-BASE-EMITTER SATURATION VOLTAGE(V) 1.4 1.2 1 VBEON- BASE-EMITTER ON VOLTAGE (V) Base-Emitter Saturation Voltage vs Collector Current = 10 Base-Emitter On Voltage vs. Collector Current 1.4 Vce = 2.0V 1.2 1 - 40 C - 40 C 0.8 0.6 0.4 0.2 0.001 25 C 0.8 0.6 0.4 0.2 0.0001 25 C 125 C 125 C 0.01 0.1 1 I C - COLLECTOR CURRENT (A) 10 0.001 0.01 0.1 1 I C - COLLECTOR CURRENT (A) 10 VCESAT- COLLECTOR-EMITTER VOLTAGE (V) Collector-Emitter Saturation Voltage vs Collector Current 0.8 = 10 Input/Output Capacitance vs. Reverse Bias Voltage 450 400 CAPACITANCE (pf) 350 300 250 200 150 100 50 C obo C ibo f = 1.0 MHz 0.6 125C 25C 0.4 - 40C 0.2 0 0.001 0.01 0.1 1 I C- COLLECTOR CURRENT (mA) 10 0 0.1 0.2 0.5 1 2 5 10 20 V CE - COLLECTOR VOLTAGE (V) 50 100 Current Gain vs. Collector Current 700 600 H FE - CURRENT GAIN 125C Vce = 2.0V 500 400 25C 300 - 40C 200 100 0 0 0.5 1 1.5 2 2.5 3 I C - COLLECTOR CURRENT (mA) 3.5 NA SuperSOTTM-3 Tape and Reel Data and Package Dimensions SSOT-3 Packaging Configuration: Figure 1.0 Customize Label Packaging Description: SSOT-3 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 3,000 units per 7" or 177cm diameter reel. The reels are dark blue in color and is made of polystyrene plastic (antistatic coated). Other option comes in 10,000 units per 13" or 330cm diameter reel. This and some other options are described in the Packaging Information table. These full reels are individually labeled and placed inside a standard intermediate made of recyclable corrugated brown paper with a Fairchild logo printing. One pizza box contains eight reels maximum. And these intermediate boxes are placed inside a labeled shipping box which comes in different sizes depending on the number of parts shipped. Antistatic Cover Tape Human Readable Embossed Label Carrier Tape 3P SSOT-3 Std Packaging Information Packaging Option Packaging type Qty per Reel/Tube/Bag Reel Size Box Dimension (mm) Max qty per Box Weight per unit (gm) Weight per Reel (kg) Note/Comments Standard (no flow code) TNR 3,000 7" Dia D87Z TNR 10,000 13" 3P 3P 3P SSOT-3 Std Unit Orientation 343mm x 342mm x 64mm Intermediate box for D87Z Option Human Readable Label 187x107x183 343x343x64 24,000 0.0097 0.1230 30,000 0.0097 0.4150 Human Readable Label sample Human Readable Label SSOT-3 Tape Leader and Trailer Configuration: Figure 2.0 187mm x 107mm x 183mm Intermediate Box for Standard Option Carrier Tape Cover Tape Components Trailer Tape 300mm minimum or 75 empty pockets Leader Tape 500mm minimum or 125 empty pockets August 1999, Rev. C SuperSOTTM-3 Tape and Reel Data and Package Dimensions, continued SSOT-3 Embossed Carrier Tape Configuration: Figure 3.0 P0 T E1 P2 D0 D1 F E2 B0 Wc W Tc K0 P1 A0 User Direction of Feed Dimensions are in millimeter Pkg type SSOT-3 (8mm) A0 3.15 +/-0.10 B0 2.77 +/-0.10 W 8.0 +/-0.3 D0 1.55 +/-0.05 D1 1.125 +/-0.125 E1 1.75 +/-0.10 E2 6.25 min F 3.50 +/-0.05 P1 4.0 +/-0.1 P0 4.0 +/-0.1 K0 1.30 +/-0.10 T 0.228 +/-0.013 Wc 5.2 +/-0.3 Tc 0.06 +/-02 Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C). 20 deg maximum Typical component cavity center line 0.5mm maximum B0 20 deg maximum component rotation 0.5mm maximum Sketch A (Side or Front Sectional View) Component Rotation A0 Sketch B (Top View) Typical component center line Sketch C (Top View) Component lateral movement SSOT-3 Reel Configuration: Figure 4.0 Component Rotation W1 Measured at Hub Dim A Max Dim A max Dim N See detail AA 7" Diameter Option B Min Dim C See detail AA W3 Dim D min 13" Diameter Option W2 max Measured at Hub DETAIL AA Dimensions are in inches and millimeters Tape Size 8mm Reel Option 7" Dia Dim A 7.00 177.8 13.00 330 Dim B 0.059 1.5 0.059 1.5 Dim C 512 +0.020/-0.008 13 +0.5/-0.2 512 +0.020/-0.008 13 +0.5/-0.2 Dim D 0.795 20.2 0.795 20.2 Dim N 2.165 55 4.00 100 Dim W1 0.331 +0.059/-0.000 8.4 +1.5/0 0.331 +0.059/-0.000 8.4 +1.5/0 Dim W2 0.567 14.4 0.567 14.4 Dim W3 (LSL-USL) 0.311 - 0.429 7.9 - 10.9 0.311 - 0.429 7.9 - 10.9 8mm 13" Dia July 1999, Rev. C SuperSOTTM-3 Tape and Reel Data and Package Dimensions, continued SuperSOTTM-3 (FS PKG Code 32) 1:1 Scale 1:1 on letter size paper Di mensions shown below are in: inches [mil limeters] Part Weight per unit (gram): 0.0097 September 1998, Rev. A TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM CoolFETTM CROSSVOLTTM E2CMOSTM FACTTM FACT Quiet SeriesTM FAST(R) FASTrTM GTOTM HiSeCTM DISCLAIMER ISOPLANARTM MICROWIRETM POPTM PowerTrenchTM QSTM Quiet SeriesTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 TinyLogicTM UHCTM VCXTM FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. |
Price & Availability of FSB560
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |